|
PROJECTS LATHE
|
|
| Adapting
a Taig four jaw chuck to the 7x10 spindle flange |
CLICK
HERE TO GO TO LINK |
| Boring
between centers |
CLICK
HERE TO GO TO LINK |
| Building a Quick Change Tool Holder
Knurl
|
CLICK HERE TO GO TO LINK |
| Building a
Collet
Adapter |
CLICK HERE TO GO TO LINK |
| Build
a die holder |
CLICK
HERE TO GO TO LINK |
| Build
a leadscrew for your Taig Microlathe
|
CLICK
HERE TO GO TO LINK |
| Build
an indexing plate for your spindle |
CLICK
HERE TO GO TO LINK |
| Centerline
marking tool |
CLICK
HERE TO GO TO LINK |
| Cutting
tapers on the lathe |
CLICK
HERE TO GO TO LINK |
| Drilling
on cross slide held work |
CLICK
HERE TO GO TO LINK |
| Instructions for making an
Adjustable
Back Plate
|
CLICK HERE TO GO TO LINK |
| Instructions for making a Lathe
Back Plate for a Screw Thread Spindle Nose. |
CLICK HERE TO GO TO LINK |
| Instructions for making a
Quick
Change Tool Post |
CLICK HERE TO GO TO LINK |
| Knurling
on the 7 x 10 Minilathe |
CLICK
HERE TO GO TO LINK |
|
Notes on Building the Above Quick
Change Tool Post |
CLICK HERE TO GO TO LINK |
| Making a Tool Holder for
Carbide
Inserts
|
CLICK HERE TO GO TO LINK |
| Making a
Ball
Turning Tool
|
CLICK HERE TO GO TO LINK |
| Make
and use a test bar to check your tailstock alignment |
CLICK
HERE TO GO TO LINK |
| Modify
the lever on your drilling tailstock |
CLICK
HERE TO GO TO LINK |
| Slow
down the 7 x 10 Minilathe |
CLICK
HERE TO GO TO LINK |
| Threading
on the lathe PART-1 |
CLICK
HERE TO GO TO LINK |
| Threading
on hte lathe PART-2 |
CLICK
HERE TO GO TO LINK |
| True
up your three jaw chuck |
CLICK
HERE TO GO TO LINK |
| Variable
speed for the Taig Microlathe |
CLICK
HERE TO GO TO LINK |